INVERTERS: WF-5110R

Product Description

WF-5110R

WFCO’s 1000 watt WF-5110R inverter delivers outstanding performance for multiple, lower power appliances. Featuring automatically resettable Reverse Polarity protection, the WF-5110R
is protected from permanent damage should a battery be connected backwards. Once the battery connections are corrected, the unit will operate normally. The WF-5110R also has an exclusive internal transfer system which automatically allows the AC input to bypass the inverter when the inverter is connected to an AC power source.

Additionally, the WF-5110R provides high-efficiency power at full-load conditions with safeguards that include overload protection, over-temperature protection, and short-circuit protection. The cooling fan enhances efficiency as its operation is controlled by the amount of load incurred by the inverter. FCC Class B compliance, which means that the inverter is designed not to cause interference with televisions, radios, or other signals.


Additional Information

Output Waveform

Pure Sine Wave (THD <3%)

Efficiency (full load)

>86%

Continuous Output Power

1000 W

Status Indicator Lights

Greed LED: AC Input Status, Red LED: Inverter Failure, Yellow LED: Battery Back Up Status

Transfer Switch

10 A, Automatic transfer to battery power

Transfer Time

<50 milliseconds

Protection Features

AC Output Fuse, GFCI, Over Temperature, Over/Under Input Voltage, Overload, Reverse Polarity (fuse), Short Circuit

Cooling

Load Controlled Cooling Fan

Output Wiring

Hard Wired

Certifications

FCC Class B compliant

Listed

UL 458

Dimensions

14.6″ L x 11″ W x 3.9″ H

Weight

11.5 lbs.

Watts

1KW

Input Voltage/Hz

120 VAC, 60 Hz

VDC

12

Input Nominal Voltage

12VDC

Input Voltage Range

10 – 15VDC

AC Voltage Regulation

+/- 3% from no load to full load under battery range

Remote Control Panel

Yes

Overload Protection

Current limiting & shutdown

Over Temperature

System shut down

Output Power

Protected by fuse: 12A/125V Circuit Breaker

Input Connection

4AWG or 2AWG wires required with 100A in-line slow blow fuse

Environmental

0-40 degrees C / 20-90% non-condensing