POWER CENTERS: WF-8500-AD SERIES

WF-8500-AD Power Center Series | 40/60 amp

The WF-8500-AD Power Center Series will charge the 12-volt House battery if installed. A battery must not be installed for WF-8500 Power Center Series converter operation. When a battery is installed, two reverse-polarity fuses are installed to protect the converter circuitry. The fuses are located along the bottom edge of the dc fuse board near the VCC+ lug. Refer to Figure 1 on the following page. This feature prevents permanent damage to the converter from a battery connected to the circuit backward. An illuminated Red LED indicates blown polarity fuses near the lugs. In addition to protecting the converter section, the reverse-polarity fuses are the primary connection between the converter and the dc fuse board.

SELECT A PRODUCT

No products were found matching your selection.